Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 


Dunwell Tech Inc is a technology service company focusing on exceptional service and custom solutions in technology and industrial related hardware and software. Dunwell Tech is the master distributor of the Dino-Lite digital microscope camera. 


MSA2HD Dental Tool Holster


MSA2HD Dental Tool Holster


MSA2HD Inspection/Dental mirror and tool adaptor kit

The MSA2HD adaptor is designed to securely hold and position an assortment of common hand-held dental/inspection mirrors and tools for use with Dino-Lite digital microscopes.

Included with each MSA2HD mirror/tool kit:
- One specialized Dino-Lite scope holster.
- A selection of five swivel-type positioning adaptors designed to fit handle diameters of approx. 4mm,5mm,6mm,7mm and 8mm.
- One swivel ball threaded retaining collar.

Instructions for assembly and use: 
1) Insert the mirror/tool handle through the bottom of the adaptor channel. 
2) Select the appropriate swivel ball adaptor that corresponds to the diameter of the mirror/tool handle. 
3) Place the appropriate sized swivel ball adaptor (slotted side UP) onto the end of the mirror/tool handle. Push/slide the ball adaptor down the handle approximately one inch. 
4) Pull the Mirror/tool down until the attached ball swivel rests in the socket receptacle. Slide the threaded retaining collar over the end of the mirror/tool handle onto receptacle and loosely tighten. 
5) Place the Dino-Lite digital microscope into the holster assembly. 
6) Position the mirror/tool in front of and below Dino-Lite scope nozzle. Adjust length and alignment of mirror/tool and Securely tighten. Fine adjust positioning as necessary until satisfactory imaging is achieved.

Add To Cart